Operating Instructions 2000W CERAMIC TOWER HEATER WITH WIFI/SMART HOME Model: GCT315
General Care and Safety Guide YOUR SAFETY IS IMPORTANT TO US. PLEASE ENSURE YOU TAKE NOTE OF THE INSTRUCTIONS AND WARNINGS OUTLINED IN THIS MANUAL. CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
General Care and Safety Guide • Never use the appliance to dry clothes. • Always unplug appliance when not in use. • When the appliance has been unpacked, check it for transport damage and ensure all parts have been delivered. If parts are missing or the appliance has been damaged, contact the Customer Services Team. • Do not use if there are visible signs of damage to the appliance. • Do not connect the appliance to mains supply until completely assembled and adjusted.
General Care and Safety Guide • The appliance must not be immersed in any liquids. • There are no user serviceable parts installed in the unit. • Do not place the unit in wardrobes or other enclosed spaces as this may cause fire hazards. • This unit is not supposed to be used in or around locations where foodstuffs, works of art or delicate articles of science, etc. are stored. • If your appliance does not work, or is not working properly, contact the place of purchase or the Customer Services Team.
Assembly Instructions • • • • Remove the 2 pieces of the base from the box. Clip them together so that they snap into position Carefully place the heater upside down on a soft surface to avoid scratching it. Place the assembled base onto the bottom of the heater and pull the power cord through the centre hole of the base. Align the holes in the base with the holes in the heater. • Insert the 4 x included screws into the aligned holes and tighten and clip the power cord into the secure slot.
Operating Your Heater Always choose a safe location for the heater, keeping in mind the safety precautions outlined. Ensure all packaging has been removed from the unit before use. Please follow the below instructions. WARNING: In order to avoid overheating or fire, do not cover the heater. WARNING: Keep all objects at least 1 metre from the front, sides and rear of the appliance.
Operating Your Heater HEATER CONTROL Ensure heater is on a flat, stable, heat-resistant surface. Once the heater is in a safe operating position and all switches are in the off position, insert the power plug into the mains outlet. Turn the Power Switch at the back of the heater to the 'I' position. The heater is now in STANDBY mode. The heater can be operated by the touchscreen control panel, remote control or via the Goldair App.
Operating Your Heater TIMER: When the heater is ON, use the Timer to set timer to turn the heater OFF. This will activate the ‘Timer’ LED. Increase timer amount by 1 hour each time you press the TIMER button, up to a maximum of 12 hours. SWING: Turns oscillation ON/OFF The remote control supplied with this appliance uses a CR2025 coin type battery.
WiFi – Downloading and Setting up APP This APP is supported only on 2.4GHz Wi-Fi channels. Please ensure your phone is 2.4GHz capable Note this device will only work within your home WIFI system. This does not operate on 3G or 4G internet connections. You will need a connection to your home Wi-Fi. Download Goldair mobile APP • Open the APP Store or Google Play on your mobile phone. • Open 'Search' and enter 'Goldair' • Click 'GET' and begin to download and install.
Pairing APP to Device Details for pairing this heater to the Goldair App can be found at the below website link. Either scan the QR code below or enter the website into your browser. New Zealand Products Australia Products https://www.goldair.co.nz/ goldair-app https://www.goldair.com.au/ goldair-app Pairing Mode To connect to the Goldair app you must ensure that your device is in pairing mode which is where the Wifi Icon is flashing.
Operating Your Heater SAFETY DEVICES This appliance has three protection devices: • Tilt Switch - this will automatically turn the appliance off if the appliance is not in the correct operating position. • Resettable Thermal Link - this will automatically disconnect the power to the appliance at a pre-set overheat temperature. After cooling down it will reset and power on again. If this occurs, investigate what is causing the appliance to overheat.
Operating Your Heater PROOF OF PURCHASE To receive warranty retain receipt as proof of purchase. SUPPORT AND TECHNICAL ADVICE Goldair – New Zealand Monday – Friday 8am-5pm Phone +64 (0)9 917 4000 Phone 0800 232 633 info@cdb.co.nz Goldair – Australia Monday – Friday 8am-5pm Phone +61 (0)3 9365 5100 Phone 1300 465 324 info@cdbgoldair.com.
Two Year Warranty Thank you for purchasing this Goldair product. Your product is warranted against faults and manufacture when used in normal domestic use for a period of two years. In non-domestic use Goldair limits the voluntary warranty to three months. Goldair undertake to repair or replace this product at no charge if found to be defective due to a manufacturing fault during the warranty period.
New Zealand PO Box 100707, North Shore Mail Centre, Auckland, 0745 www.goldair.co.nz Australia PO Box 574, South Morang, Victoria, 3752 www.goldair.com.
