User Manual

WARNING Keep all objects at least 1 metre
from the front, sides and rear of the
appliance
Fan control switch
The control switch positions are:
• 0 = Off
• 1 = Low speed
• 2 = Medium Speed
• 3 = High Speed
Place the fan on a dry, level and sturdy surface.
Plug the power cord into the socket, making
sure the speed control is in the off position.
To operate the fan, turn speed control dial
clockwise until desired wind speed is achieved.
Adjust tilt by tilting the fan head to the desired
wind direction (i.e. Either upward or
downward).
To activate the oscillation function, push down
the oscillation pin on the top of the motor. The
fan will then oscillate until the pin is pulled
back up.
IMPORTANT! NEVER COVER THIS APPLIANCE!
Always choose a safe location for the fan, keeping in mind the safety precautions outlined.
Ensure all packaging has been removed from the unit before use. This appliance requires no
installation, it should be used solely as a portable appliance.
Operating your Fan