User Manual

ManualsBrandsGolden Lighting ManualsLighting7509-BA3 PW

Mounting Strap

Junction Box

Screw

Mounting Screw

1ea 4"X3" 2ea 8/32"X1" 2ea 8/32"X28mm

Wire

Connnector

Hex Nut

Deco Nut

(round nut)

3ea P3 Orange 2ea 8/32"X3.5mm 2ea 9X9.5mm

Green Ground

Screw

Bulb

1ea 8/32"X10mm

3ea G9*40W

Part Needed Quantity

Reason why ( missing, scratched, broken glass, bent, bad finish)

Comments

NOTE: INSTALL THE GLASS ASSEMBLY

AFTER THE FIXTURE IS HUNG.

For Customer Service, contact the place of purchase to arrange for replacement parts.

PARTS LIST

Fig. 1

Company Name:_______________________Co. Account #:___________

below to be filled out by retailer

FIXTURE ASSEMBLY INSTRUCTIONS

Read and review installation instruction sheet

before assembling the fixture.

7509-BA3 PW

PARTS & ASSEMBLY SHEET

Fixture Name: Asteria 7509-BA3 PW

This fixture assembled PO:__________ Date: ________

Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are

missing or damaged, please note onthis sheet and contact the place of purchase to arrange for replacement

parts.

1.Pour Crystals (Y) into the groove of Glass Shade (O). Then,

gently slide Glass Shade (O) over the socket and secure Glass

Shade (O) by threading Socket Ring (L) over the socket.

2. Thread the Final Cap (R) into Bath Bar (S) unitl tighted.

3. Install the provided light bulb in accordance with the fixture's

specifications. Bulb note: Use a tissue or paper towel to hold

the bulb and push down into the socket. Oils or dirt can cause

the bulb life to shorten. Rubbing alcohol is recommended to

clean the bulbs if dirty.

(DO NOT EXCEED THE MAXIMUM WATTAGE RATING!)

Summary of content (3 pages)

PAGE 1
PARTS & ASSEMBLY SHEET Fixture Name: Asteria 7509-BA3 PW This fixture assembled PO:__________ Date: ________ Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or damaged, please note onthis sheet and contact the place of purchase to arrange for replacement parts. PARTS LIST Company Name:_______________________Co.
PAGE 2
`
PAGE 3
INSTALLATION INSTRUCTIONS Fixture Name: Asteria 7509-BA3 PW For Wall Mount Light Fixture WARNING ! SHUT OFF POWER AT FUSE OR CIRCUIT BREAKER. HANGING THE FIXTURE (Fig. 1) 1. Carefully remove the new fixture from the carton and the yellow bag that holds all your parts. Check that all parts are included as shown in the illustration and parts list. Fig. 1 2. Shut off power at the circuit breaker and remove the old fixture from wall, including the old mounting strap. 3.