User Manual

ManualsBrandsGolden Lighting ManualsLighting7509-BA3 PW

FINISHING THE INSTALLATION (Fig. 3)

9. Place fixture Back Plate (J), over Mounting Screws (B), so they

protrude through the holes in Back Plate (J).

10. Thread Deco Nuts (H) onto Mounting Screws (B) and continue

turning until Back Plate (J) is snug against the wall.

11. Install glass as per the fixture assembly instructions

YOUR INSTALLATION IS NOW COMPLETE. RETURN POWER

TO THE JUNCTION BOX AND TEST THE FIXTURE

Fig. 3

For Customer Service, contact the place of purchase to arrange for replacement parts.

HANGING THE FIXTURE (Fig. 1)

1. Carefully remove the new fixture from the carton and the yellow

bag that holds all your parts. Check that all parts are included as

shown in the illustration and parts list.

2. Shut off power at the circuit breaker and remove the old fixture

from wall, including the old mounting strap.

3. Mounting Strap (A) contains several pairs of threaded holes. Find

the pair of holes that matches the holes spacing in fixture Back Plate

(K) and thread the Mounting Screws (B) half way into Mounting Strap

(A).

4. Place Mounting Strap (A) over Junction Box (E) so that Mounting

Screws (B) are vertical or horizontal, as required by fixture type.

5. Attach Mounting Strap (A) to Junction Box (E) by using two

mounting screws (D). Tighten the screws securely.

Fig. 1

CONNECTING THE WIRES (Fig. 2)

5. Attach the power supply wires to the fixture lead wires by

connecting BLACK to BLACK (or SMOOTH) and WHITE to WHITE

(or RIBBED).

6. Attach the GROUND wire (GREEN or COPPER) from the Junction

Box and the fixture Ground wire to the green Ground Screw on

Mounting Bracket (A) or connect both wires together using the

correct size of wire connectors.

NOTE: Twist the wires together in the same direction you twist the

wire connector onto the wires.

7. Tuck these wire connections neatly into the Junction Box.

Fig. 2

INSTALLATION INSTRUCTIONS

Fixture Name: Asteria 7509-BA3 PW

For Wall Mount Light Fixture

WARNING ! SHUT OFF POWER AT FUSE OR CIRCUIT BREAKER.

BARE COPPER

(Ground)

GREEN

(Ground)

FIXTURE WIRES

SMOOTH (BLACK)

RIBBED (WHITE)

BLACK

WHITE

HOUSE WIRES