Operating Manual

ManualsBrandsGOLDEN ROOT ManualsIndustrial & ScientificThermal Imager

PTI-NKH1-01 Thermal Imager Operating Manual

A Cover for connectors compartment

B Memory card

C C-type USB Jack

D Front lens Cap

E Trigger to record video

F Battery

G Power Button/photo Button H MENU

I UP J Return

K Button to confirm choice L DOWN

M Right N Left

O Battery Indicator

Screen Elements

1. Date and Time

2. Function icon

3. Temperature Scale

4. Central Temperature and Distance

H: Max Temp. Location

L: Min Temp. Location

5. Recordable time on Memory Card

6. TL: Highest Temp. TH : Lowest Temp H:Humidity Rate T：Environment Temp

7. Overheat Warning Icon

Operating Manual:

# Power on:

Press for 3 seconds and release it, the boot process can be complete in

seconds.

# Power Off:

Press for 3 seconds to turn off. To force shutdown, press power button and

trigger in the same time and hold for 3 seconds then release the buttons.

# Photo/Recording video:

To record video, please press trigger to start recording and press trigger again to

finish. Short press to take photo.(It’s available to take picture while recording.)

Summary of content (7 pages)

PAGE 1
PTI-NKH1-01 Thermal Imager Operating Manual A Cover for connectors compartment B Memory card C C-type USB Jack D Front lens Cap E Trigger to record video F Battery G Power Button/photo Button H MENU I UP J Return K Button to confirm choice L DOWN M Right N Left O Battery Indicator Screen Elements 1. 2. 3. 4. Date and Time Function icon Temperature Scale Central Temperature and Distance H: Max Temp. Location L: Min Temp. Location 5. Recordable time on Memory Card 6.
PAGE 2
# when installing the battery, please ensure the arrowhead on battery is aligned with the middle of screen to avoid damage to battery or machine. # To switch function, please see below: A. Press to B. to Press . Press to select Thermal Image color bar(7 options). (thermal/grey/sketch). Press to exchange mode C. Press D. Press Press to switch (℃ / ℉). to AUTO, (Max, Min , Max and Min, Auto) to exchange mode. Press to set temperature. : Adjust maximum temperature.
PAGE 3
stamped on recorded videos and photos Normal Screen. Grid Screen. Close Battery icon and recordable time. G. Press to (Auto Focus/Near/Middle/Far) ， to exchange mode. This mode help you to focus on small object. :Auto Focus, :Under 15 cm, : 15 ~ 45 cm 60 cm and far H. Press to (Vertical adjustment / horizontal adjustment) If the thermal image doesn’t overlap on the object, press mode and I. Press to exchange to adjust thermal image location.
PAGE 4
: Light Frequency: Change light frequency to 50Hz or60Hz. Power Save: To setup time for auto power off. Date& Time: Date &Time Setup. Wi-Fi: To enable Wi-Fi and setup SSID and password. Language: To select languages USB Mode: To setup USB Out function. Format: To delete all recorded video/photos Reset All: To set back to default. Information: To review the Thermal Cam information here. : To review recorded videos and photos. Press to switch video/ photos review option. Wifi Connected Setup: 1.
PAGE 5
After connecting thermal cam with computer through USB-C Cable, the computer screen would pop-up real-time image window. Software Update: To update software, please visit Panrico official site to download latest version of Thermal cam software. Put software into Thermal cam’s SD memory card. Restart the thermal cam and the system will automatically update the software. #To check version of software, please see Information under menu. Safety Notes Please read and observe all instructions.
PAGE 6
measurements. Incorrect settings on the tool and other atmospheric influences may make the measurements inaccurate. Objects could be depicted hotter or colder, which may present a danger if touched.  Temperature measurements will only be correct if the emissivity setting and the emissivity of the object match. Objects could be depicted hotter or colder in temperature and/or color, which may present a danger if touched.  The measuring tool is equipped with a radio interface.
PAGE 7
with any other antenna or transmitter. RF Exposure Information (SAR) This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg.