Operating Manual

After connecting thermal cam with computer through USB-C Cable, the computer
screen would pop-up real-time image window.
Software Update:
To update software, please visit Panrico official site to download latest version of
Thermal cam software. Put software into Thermal cam’s SD memory card.
Restart the thermal cam and the system will automatically update the software.
#To check version of software, please see Information under menu.
Safety Notes
Please read and observe all instructions. The integrated protections in the
measuring tool may be compromised if the measuring tool is not used in accordance
with the instructions provided. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
 Have the measuring tool repaired only through qualified specialists using original
spare parts. This ensures that the safety of the measuring tool is maintained.
 Do not operate the measuring tool in explosive environments, such as in the
presence of flammable liquids, gases or dusts. Sparks can be created in the
measuring tool which may ignite the dust or fumes.
 Before any work on the measuring tool itself (e.g. assembling, maintenance, etc.)
as well as when transporting and storing, remove the battery pack or the batteries
from the measuring tool. Protect the battery pack against heat, e.g., against
continuous intense sunlight, fire, water, and moisture. Danger of explosion.
 When battery pack is not in use, keep it away from other metal objects like paper
clips, coins, keys, nails, screws, or other small metal objects that can make a
connection from one terminal to another. Shorting the battery terminals together
may cause burns or a fire.
 Recharge only with the charger specified by the manufacturer. Only 110V ~ 230V
charging stand is used to charge the battery. If charging battery over limit, the
battery may be damaged.
 The battery pack can be damaged by pointed objects such as nails or screwdrivers
or by force applied externally. An internal short circuit can occur and the battery pack
can burn, smoke, explode or overheat.
 Remove the batteries from the measuring tool when not using it for extended
periods. When storing for extended periods, the batteries can corrode and self-
discharge.
 Protect the measuring tool, particularly the area around the camera and infrared
lens, against moisture and snow. The reception lens could fog up and distort the