Installation Guide

Installation Instruction for Top-mount Sink

Tools and Materials

□ Tape Measure

□ Safety Glasses

□ Construction Adhesive

□ Screw Driver

□ Gloves

□ Pencil

Attention Installer

□ Due to the nature of top-mount installations, we recommend that top-mount sink installations be

performed by trained and experienced installers.

□ Sink edge may be sharp; handle with caution.

□ Clean the sink surface with a soft towel to prevent scratch products.

□ Inspect sink for damage prior to beginning installation.

□ This template is only a guide. Actual sink should be present to ensure prefect cut out.

Installing Sink

1. Using the Cutout Sheet

□ Use the provided cutout sheet to carefully measure and cut the countertop for the top-mounted sink.

□ Please ensure all measurements are accurate and precise before cutting or drilling.

PAGE 1
Installation Instruction for Top-mount Sink Tools and Materials □ Tape Measure □ Safety Glasses □ Construction Adhesive □ Screw Driver □ Gloves □ Pencil Attention Installer □ Due to the nature of top-mount installations, we recommend that top-mount sink installations be performed by trained and experienced installers. □ Sink edge may be sharp; handle with caution. □ Clean the sink surface with a soft towel to prevent scratch products. □ Inspect sink for damage prior to beginning installation.
PAGE 2
. Testing the Fit □ With the opening now complete, drop the sink in the space created. □ Check for any issues with the fit and alignment. □ Make any adjustments if necessary. Always ensure the sink is level with the countertop. 3. Apply Sealant □ Apply a bead of silicone sealant to the edge of the sink. 4. Lowering the Sink □ Proceed by lowering the sink in the opening and ensure the silicone sealant meets the edges. □ Fix the screws as per illustration. Tighten evenly.