Product Brochure

Invisa SP 652 Single Point Stereo Speaker
Invisa 600: Our Most Aordable High-Performance In-Ceiling Speaker
Looking for a high-performance aordable alternative to the
“Contractor Quality” in-walls your builder might suggest? The
Invisa 600 is based on our best-selling Invisa 650, with the same
one-piece marble-infused frame/ange construction built around
the same 6-1/2" driver. It also oers the same minimal footprint,
which delivers the exceptional performance advantages of a 6-1/2"
driver-based system in a compact size comparable to that of most
competitors’ 5-1/4" systems. Of course, it also features a paintable
MagneLock grille (and optional square grille).
Instead of our signature HVFR tweeter, the 600 incorporates a
newly developed pure titanium, pivoting 1" dome tweeter with
a silk surround. We believe its performance, while not quite rivaling
our folded ribbon, is the best of any dome tweeter available among
in-wall/in-ceiling architectural products. Signature GoldenEar
all the way, an eective crossover network enabling natural
blending and voicing.
The Invisa SP 652 is a very versatile all-in-one stereo speaker that,
when both channels are paralleled, also makes a great bipolar
surround speaker or an in-ceiling Atmos height speaker. Solidly
constructed of a marble-infused polymer, the SP 652 features
an integral high-denition wide-dispersion dual-wound 6-1/2"
voice-coil driver. Care has been taken in this design to minimize
diraction-based distortions that are common in many other
stereo speakers that sink the drivers too deeply into the structure.
Two costly but superb HVFR™ tweeters are mounted in an
acoustically optimized high-frequency pod with a precisely
calculated angle to maximize stereo coverage and radiation into
the room. It is unique to nd tweeters of this quality in single-
point stereo speakers.
The dual crossovers incorporate high-quality components
to precisely blend the drivers for natural, exquisite sound quality.
A specially contoured Santoprene anti-resonance/diraction-
control ring is incorporated around the driver and covers
the surrounds to further optimize performance. A high-
frequency equalization switch precisely matches the SP 652
to any environment.
Invisa 652
Invisa 600
INVISA SP652 SPECIFICATIONS
Dimensions: 8-5/8" diameter. Depth: 3-7/16". Cut-Out Size: 7-1/8" diameter.
Frequency Response: Depending on rear loading, 35Hz-35kHz. Eciency: 86 dB.
Nominal Impedance: 4Ω (Compatible with 8Ω). Driver Complement: One - 6-1/2"
Dual-Wound Voice-Coil Mid/Bass Driver. Two - HVFR™ High-Velocity Folded Ribbon
Tweeters. Rec. Amp: 10 – 125 Watt/channel.
INVISA 600 SPECIFICATIONS
Dimensions: 8-5/8" diameter. Cut-Out Size: 7-1/8" diameter. Depth: 3-7/16".
Frequency Response: Depending on rear loading, 35Hz-35kHz. Sensitivity: 90 dB.
Nominal Impedance: 4Ω (Compatible with 8Ω). Driver Complement: One 6-1/2"
high-denition cast-basket MVPP™ mid/bass driver One Pivoting Titanium Dome
Tweeter with Silk Surround. Rec. Amp: 10 – 250 Watt/channel.
“The entire GoldenEar Invisa home theater system was absolutely
stunning... it created an absolutely stunning audio envelope.”
– Darryl Wilkinsonn , Sound & Vision
© GoldenEar
™
All rights reserved. Reproduction in whole or in part without our express permission is prohibited.
2621 White Road • Irvine, CA 92614
www.goldenear.com 949-800-1800