Product Brochure

Invisa 525
The Invisa MPX MultiPolar™ In-Wall/In-Ceiling Loudspeaker oers
many of the advantages of a direct-radiating loudspeaker but with
enhanced spaciousness and dispersion. This makes it the perfect
choice for the rear- or side-surround channels of a multi-channel
installation, as well as for front main speakers or for distributed-
audio multi-room installations.
Easily mounted in-wall or in-ceiling and very exible in terms
of orientation, the MPX MultiPolar, like the other Invisa Series
speakers, has a at magnetically attached micro-perf grille that
covers the ange for an attractive, nearly invisible look. It com-
bines two precisely angled 4.5" bass/midrange drivers, a High-
Velocity Folded Ribbon Tweeter (HVFR™), and a complex crossover
network with a high-frequency equalization switch. Like the Invisa
HTR 7000, the MPX MultiPolar is engineered for enhanced clarity
and source-less sound radiation into the room.
Invisa MPX MultiPolar
“... capable of bringing many dedicated theater rooms to
their knees ... the Invisa speakers are that good.”
– Todd Anderson , AV Nirvana
Invisa MPX MultiPolar In-Wall/In-Ceiling Loudspeaker
Invisa 525 and 650 High-Denition Architectural Loudspeakers
“The Invisas, as a collective unit, sounded
totally seamless ... there was that extra bit of
synergy (or magic) between all the pieces ...
that just put the sound over the top for me.”
– Carlo Lo Raso , Secrets of Home Theater
In both quality of construction and superb sonics, the Invisa 525
and 650 in-ceiling/in-wall speakers are very similar. Both use bass/
midrange drivers and an Air-Motion Transformer (High-Velocity
Folded Ribbon) tweeter similar to those in GoldenEar’s award-
winning Triton Towers. The larger 650’s 6.5" driver can play some-
what louder, with more physically present low-frequency energy
than the 5.25" driver-based 525.
Like other Invisa Series speakers, the 525 and 650 disappear into
their surroundings thanks to their one-piece hidden-ange
construction and magnetically attached grille.
In both models, the angle of the tweeter can be adjusted to
achieve wide, well-controlled dispersion and minimize unwanted
reections.The tweeters pivot to optimize their in-room perfor-
mance, and a high-frequency equalization switch allows further
tailoring to the room and the listener’s tastes.
INVISA MPX MULTIPOLAR
™
SPECIFICATIONS
Dimensions: 13-7/8" H x 7-1/4" W x 3-3/4" D. Cut-Out Dimensions: 12-3/4" H x 6-1/4" W.
Frequency Response: Depending on rear loading, 35Hz-35kHz. Sensitivity: 90 dB.
Nominal Impedance: 4Ω (Compatible with 8Ω). Driver Complement: Two 4-1/2" High-
Denition Cast-Basket MVPP
™
Bass/Midrange Drivers, One High-Velocity Folded Ribbon
Tweeter (HVFR
™
). Rec. Amp: 10 – 250 Watt/channel.
Invisa 650
INVISA650 SPECIFICATIONS
Dimensions: 8-5/8" diameter. Cut-Out Size: 7-1/8" diameter. Depth: 3-7/16". Frequency
Response: Depending on rear loading, 35Hz-35kHz. Sensitivity: 90 dB. Nominal
Impedance: 4Ω (Compatible with 8Ω). Driver Complement: One 6-1/2" bass/midrange
driver, One High-Velocity Folded Ribbon (HVFR
™
) high-frequency radiator.
Rec. Amp: 10 – 250 Watt/channel.
INVISA525 SPECIFICATIONS
Dimensions: 7-3/4" diameter. Cut-Out Size: 6-3/16" diameter. Depth: 3-7/16". Frequency
Response: Depending on rear loading, 35Hz-35kHz. Sensitivity: 89 dB. Nominal
Impedance: 4Ω (Compatible with 8Ω). Driver Complement: One 5-1/4" bass/midrange
driver, One High-Velocity Folded Ribbon (HVFR
™
) high-frequency radiator.
Rec. Amp: 10 – 200 Watt/channel.