Owner's Manual

The SuperSwivel
™
is intended for use with GoldenEar Technology SuperSat
®
Speakers, 3D Array
®
Soundbars, or similar loudspeakers with
1
⁄4-20 threaded
receptacles. Each bracket can support up to 11 lbs (5.0 kg). Do not use
a single bracket with any speaker weighing more than 11 lbs (5.0 kg). Use
one (1) SuperSwivel™ brackets with the SuperSat 3, 3C, 50 and 60 (for
vertical mounting). Use two (2) SuperSwivel™ brackets with the SuperSat
50C, 60C and the 3D Array Soundbars.
GoldenEar Technology
'
P.O. Box 410
'
Stevenson, MD 21153
'
410-998-9134
'
www.goldenear.com
Step 2
Fasten the ball pivot to the
1
⁄4-20 threaded
receptacle on the back of the loudspeaker.
Tighten the ball pivot nut using a
7
⁄16"(11mm)
wrench. (NOTE: For Mounting SuperSat 50 and
60 in vertical orientation with one SuperSwivel,
use the upper insert.)
ball pivot nut
'
SuperSwivel
™
Universal Mounting Bracket
User’s Guide
ball pivot
clamping screw
Step 1
Loosen the clamping screw with supplied Allen (hex)
wrench until the ball pivot slides out. Be careful not
to fully remove the clamping hex screw.
Step 3
1. Using the wall plate as a template, mark the two screw-hole positions
on the wall where you wish to mount the bracket.
2. Mounting holes in the bracket will t #10 screws (not included). Secure
the bracket to the wall using a minimum of two screws.
Installation