Instruction Manual

Positioning SuperCinema 3D Array
To ensure the best performance possible, observe the following placement guidelines:
ACCURATE TIMBRE: For the most accurate and natural timbre, speakers’ high-frequency drivers should be at
approximately ear level.
Place the speaker above or below your TV, whichever position is closer to ear level. Your SuperCinema 3D
Array speaker can be placed on top of a shelf or on top of your TV using the adjustable TV-Top/Shelf Support Foot
included, or wall mounted (refer to Wall Mounting instructions further on in this manual). If placing the speaker on
a shelf, make sure to place the speaker as far forward on the shelf as possible to prevent unwanted reflections off
the shelf’s surface.
Speaker Break-in
Your new SuperCinema 3D Array loudspeaker system should sound good right out of the box; however, an
extended break-in period of 40-60 hours or more of normal playing time is required to reach full audiophile
performance capability. Break-in allows the driver suspensions to work-in and crossover components to “heal,”
resulting in fuller and tighter bass, a more open “blossoming” midrange and smoother high frequency reproduction.
7