User's Manual

5
LOCATION OF CONTROLS
1) Rod antenna
2) On/ Standby
3) Volume knob
4) Alarm button
5) Repeat
6) Dimmer / Snooze button
7) CD Door Open button
8) Function button
9) Play/Pause button
10) Skip up /down button
11) Stop button
12) Memory/Pre button
13) Clock adjust button
14) Speaker
15) LED display
16) PM LED indicator
17) Bluetooth/MEM LED indicator
18) Rep 1/all/Snooze LED indicator
19) Alarm LED indicator
20) Headphone jack (3.5mm)
21) DC in jack
22) Aux-in jack (3.5mm)
23) Battery compartment cover
24) AC/DC adaptor
25) DC plug
Caution:
Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation
exposure.
This unit should not be adjusted or repaired by anyone except qualified service personnel.
Precautions for use
Installation
• Unpack all parts and remove protective material.
• Do not connect the unit to the mains before checking the main voltage and before all other connections have been made.
• Do not cover any vents and make sure that there is a space of several centimeters around the unit for ventilation.
AC connection
1. Insert the DC plug (25) to the DC jack (21) of the main unit, then connect the AC/DC adaptor (24) to AC outlet
2. When you first plug the unit into the mains, the LED display (15) will show “0 :00 ” and the “:” will start flashing.
3. Turn on the unit by pressing the on/off button (2), if the LED display is on, it means the power supply is normal. Now your system
is ready to operate