TURNTABLE WITH USB ENCODING TO COMPUTER TT-182NPC BT Owner Manual
The Caution Marking is located at the bottom enclosure of the apparatus. The Rating plate is located at the bottom enclosure of the apparatus. IMPORTANT SAFETY INSTRUCTIONS: 1. Read the instructions. All uses guidelines must be read before start device. 2. Keep the instructions for future use. 3. Attention, use and security guidelines must be respected. 4. The device must not be used near water or be put in contact with moisture. 5. Make sure has no liquid is spilled on device and device openings. 6.
COMPLIANCE WITH FCC REGULATIONS FCC ID : RQU-TT182NPCBT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
LOCATION OF CONTROLS 1) Dust Cover 2) Left Speaker 3) Pitch Adjust 4) 3.
OPERATIONS STEREO PHONOGRAPH OPERATION PLEASE NOTE - BEFORE USE - Remove the stylus protector. Make sure that the tone arm is unlocked and free to move from the tone arm rest prior to operating. Lock the tone arm again when not in use. 1. Slide the Power On/Off switch (6) to on position and set the Bluetooth/Phono switch (7) at Phono position 2. Raise the turntable dust cover. 3. Place the record on the platter (use the 45 RPM record adaptor (11) if you are playing 45 RPM records). 4.
8. If you want to connect the TT-182NPC BT to another Bluetooth enabled device after you’ve already successfully paired to another device, turn off the Bluetooth on the device that was previously paired with the JTA-230BT. The JTA-230BT Bluetooth indicator will begin flashing, repeat step 1-6 above. Note: The JTA-230BT may automatically reconnect to a previously linked device that is in range, so you may need to turn off the Bluetooth on any paired device first before going through the above steps.
Software Name Operation System Lame_Library_v3.98.2_for_Audacity_on_OSX Audacity 2.0 on Mac OSX Audacity 2.0 on Windows Lame_v3.99.3_for_Audacity_on_Windows (Me/2000/XP/Visa) LINE OUT CONNECTION You can connect this unit to your external Hi-Fi / AMPLIFIER system by connecting the LINE OUT socket (14) to the auxiliary input socket of your Hi-Fi / AMPLIFIER system. with a RCA cable (not included). Note: The Volume control will not function when using the LINE OUT.
