3-SPEED STEREO TURNTABLE WITH STEREO SPEAKERS, SPEED ADJUSTMENT AND BLUETOOTH RECEIVER MODEL: JTA-325BTW USER MANUAL PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions - All the safety and operating instructions should be read before the appliance is operated 2.
tip-over. 13. Unplug this apparatus during lightning storms or when unused for a long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15.
IMPORTANT NOTES Avoid installing the unit in locations described below: • Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters. • Places subject to constant vibration. • Dusty, humid or moist places. COMPLIANCE WITH FCC REGULATIONS FCC ID : RQU-TT938PCBT This device complies with Part 15 of the FCC Rules.
DEAR JENSEN® CUSTOMER Selecting fine audio equipment such as the unit you've just purchased is only the start of your musical enjoyment. Now it's time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association's Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
ACCESSORIES INCLUDED - Application CD USB cable - User Manual 45 RPM Record Adapter GETTING STARTED SPEAKER CONNECTION 1. Plug the RCA plug of left speaker into the left speaker RCA socket with the “L” mark locates at back of the unit. 2. Plug the RCA plug of right speaker into the right speaker RCA socket with the “R” mark. NOTE: Make sure that the power is turned off when connecting or disconnecting the speakers. Make sure that the speakers are connected to the correct sockets.
LOCATION OF CONTROLS 1. 3.5mm AUX-IN Jack 2. 3.5mm Headphone jack 3. Bluetooth / Aux/Phono Press Button 4. Bluetooth LED Indicator 5. Power LED Indicator 6. Power On/Off / Volume Control Knob 7. Anti Shock Lock Down Screw 8. 45 RPM Record Adaptor 9. 33/45/78RPM Speed Selector 10. Auto Stop Switch 11. Tone Arm Rest/Holder 12. Pitch Adjust 13. USB Port For Computer Connection 14. Speaker Out RCA Jacks (L/R) 15.
playing 45 RPM records). 5. Set the speed selector to the proper position for the record you are playing. 6. Lift the tone arm from the rest and slowly move it over the record. The turntable platter will begin spinning. 7. Place the tone arm down onto the record at the location that you want to play. 8. Adjust the volume to the desired level. 9. At the end of record, the platter will automatically stop spinning. Lift the tone arm from the record and return it to the rest. 10.
Note: The JTA-325BTW may automatically reconnect to a previously linked device that is in range, so you may need to turn off the Bluetooth on any paired device first before going through the above steps. PLAY MUSIC FROM YOUR BLUETOOTH DEVICE WIRELESSLY TO THE JTA325BTW. 1. Select your favorite song, press the Play/Pause on your Bluetooth device to play or pause the song from your Bluetooth device. 2. Press the skip forward/skip backward on your Bluetooth device to select the Next or Previous track. 3.
USING HEADPHONES (NOT INCLUDED) Inserting the plug of your headphones into the Headphone jack will enable you to listen in private. READ THIS IMPORTANT INFORMATION BEFORE USING YOUR HEADPHONES 1. Avoid extended play at very high volume as it may impair your hearing. 2. If you experience ringing in your ears, reduce the volume or shut off your unit. 3. Keep the volume at a reasonable level even if your headset is an open-air type designed to allow you to hear outside sounds.
3. Select “Edit” and then click “Audio Properties“ towards the bottom of the menu to select “Audio properties” interface. 4. In the Sound Recording field, click the pull down menu to select “ USB PnP Audio Device ” as Default device of sound recording.
5. Click the Volume button under the Sound recording tab to open ”Recording Control“ interface; 6. Adjust the line in volume to a level without distortion. You can play a record on the turntable and use the Sound Recorder to record a short clip of music for testing. The sound wave will show on the interface screen when recording. RUNNING AUDACITY SOFTWARE Note: Please review the software license and distribution restrictions found on the software disc.
3. Click “Preferences” at the bottom of the Edit menu, you can set the Devices, Quality, and various settings here. 4. Adjust the input and output volume by sliding the Input and Output Volume bars.
5. Click the record button to start recording, left and right tracks will show on your computer screen. If you cannot see the sound waves appear on the Interface when recording, adjust the Input volume bar. 6. Use the Audacity control panel to record or listen the music you have recorded - Click button to start recording. - Click the button to skip to start; - Click the button to skip to end; - Click the button to play; - Click the button to pause; - Click the button to stop.
Note: Normally, Audacity will automatically locate the Lame file that you installed. However, if you change default directory of Lame program, you may need to manually locate it by using Audacity Edit Preference Libraries and the click “Locate” button on computer screen to browse “lame_enc.dll” file where the directory you have installed. See Fig.1 & 2 below and click OK to finish manual installation. Fig. 1 Fig.2 CARE AND MAINTENANCE 1. 2. 3.
If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a soft cloth slightly dampened with a mild soap and water solution. Never use abrasive cloths or polishes as these will damage the finish of your unit. CAUTION: Never allow any water or other liquids to get inside the unit while cleaning. RECORD CARE AND MAINTENANCE To ensure the best sound and the least amount of wear on your records, it’s essential that they are kept clean.
TROUBLESHOOTING GUIDE SHOULD YOU EXPERIENCE DIFFICULTIES IN THE USE OF THIS PLAYER PLEASE REFER TO THE FOLLOWING CHART OR CALL 1-800-777-5331 FOR CUSTOMER SERVICE. PROBLEM POSSIBLE CAUSE SOLUTION AC power cord is not plugged into a wall outlet or the Plug the AC power cord into a wall connector is not plugged into outlet and plug the connector into the The unit does not the power supply jack on the supply jack on the unit. respond (no back of the unit. power). Wall outlet is not functioning.
At Spectra, environmental and social responsibility is a core value of our business. We are dedicated to continuous implementation of responsible initiatives with an aim to conserve and maintain the environment through responsible recycling. Please visit us at http://www.spectraintl.com/green.htm for more information on Spectra’s green initiatives or to find a recycler in your area. 90 DAY LIMITED WARRANTY AND SERVICE VALID IN THE U.S.A. ONLY SPECTRA MERCHANDISING INTERNATIONAL, INC.
