User's Manual

E8
Note: The JTA-325BTW may automatically reconnect to a previously linked device
that is in range, so you may need to turn off the Bluetooth on any paired
device first before going through the above steps.
PLAY MUSIC FROM YOUR BLUETOOTH DEVICE WIRELESSLY TO THE JTA-
325BTW.
1. Select your favorite song, press the Play/Pause on your Bluetooth device to play or
pause the song from your Bluetooth device.
2. Press the skip forward/skip backward on your Bluetooth device to select the Next or
Previous track.
3. Slowly adjust both the volume controls of your JTA-325BTW and your Bluetooth
device until you reach a comfortable listening level.
Notes:
1. Refer to the manual of your cell phone, tablet PC, computer or other Bluetooth
enabled devices for Bluetooth operation since it may vary from model to model.
2. If your Bluetooth enabled device does not support A2DP profile, it will not play the
music through the speaker, even if paired (linked).
3. Remember to turn off the JTA-325BTW when you have finished listening,
4. Don't forget to switch off the power of your Bluetooth device as well.
5. The music playback will automatically be paused when you have an incoming call.
When the call is ended, the JTA-325BTW will start playing again.
6. The Bluetooth operation will be interrupted if Aux-in jack is being connected. So be
sure to disconnect the Aux-in cord prior to using the Bluetooth function.
AUXILIARY INPUT
This unit provides an auxiliary audio signal input jack for connecting external audio
devices like MP3 players, CD players and older, non-dockable iPods (except iPod
shuffle 3
rd
gen) so you can listen to your external source through the speakers of this
system.
1. Use an audio cable (not included) with one 3.5 mm stereo plug on each end of the
cable.
2. Plug one end into the AUX-IN jack on the main unit and the other end of the cable
into the Line-out Jack or Headphone Jack of your external audio device. It will
automatically switch the unit to AUX mode.
3. Turn on unit power and your external audio device.
4. Press the Bluetooth / Phono/Aux button of the unit and make sure it is in the
“ Phono/Aux ” position (up - )
5. The volume level can now be controlled through the main unit. Operate all other
functions on the auxiliary device as usual.
Note:
(1.)If the Line Out Jack of your external device is connected, then you only need to
adjust the volume control of this system. If the Headphone Jack of your external
device is connected, then you may need to adjust both the volume control of your
external device and the volume control of this system to find the most desirable
volume setting.
(2.)The turntable cannot be used while using the Aux-in cord is plugged in, so be sure to
disconnect the Aux-in cord prior to using the turntable.
(3.)Rotate the POWER/VOLUME knob to turn off the system when you finish listening.
Don't forget to switch off the power on your external device as well.