User's Manual

- FM : the receiver has a built-in FM wire antenna (19) hanging at the rear cabinet. This wire should be totally
unraveled and extended for best reception.
- AM : the receiver has a built-in am bar antenna. If am reception is weak, slightly rotate or re-positioning of the unit
will usually improve the am reception.
1
Bluetooth connecting and Playback
1. Select the Off/function selector (16) to AUX/BLUETOOTH position.
2. The Bluetooth LED indicator (3) will flashing, it means the Bluetooth in non connection / searching mode.
3. Switch on the Bluetooth feature of your Bluetooth device (such as mobile phone) and select “ Goldsound”
Bluetooth equipment to connecting.
4. Once the connecting was finish and connect successfully, the Bluetooth LED (3) will change to light up.
5. Start to playback your Bluetooth device and enjoy the music by the main unit.
6. To re connect to another Bluetooth device conveniently, just press the BT disconnect button (5) once, the system
will disconnect with the existing Bluetooth directly, then repeat step 3 to re connect another one Bluetooth device.
Remark : Due to Bluetooth and Aux design in same channel of this unit, once the Aux in jack (15) plugged by any
3.5mm stereo plug, the function will change to Aux in automatically and the Bluetooth LED indicator (3) will goes off.
Made sure the Aux In jack (15) without plugged by anything before playing Bluetooth.
Aux-in connection with mobile holder
Connect another audio device, e.g. (portable) CD player, MP3 player, to this system via a provided cord with 3.5mm
dia plug. Connect one end of this cord to the 3.5mm dia. headphone jack on the external device and the other end to
the Aux-in jack (15) on the top of the unit. Set the Off/function selector (16) to AUX/BLUETOOTH position. When
connected in this way it is possible to play back the music already on the connected device.
Treble and Bass control
You can enjoy the adjustable bass and treble sound by rotate the Treble knob (11) and Bass knob (13).
2