VERTICAL CD/MP3 MUSIC TOWER WITH MOBILE CELL PHONE HOLDER VT-201B INSTRUCTION MANUAL
WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions 2. Keep these instructions 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings.
15. This appliance shall not be exposed to dripping or splashing water and that no object filled with liquids such as vases shall be placed on the apparatus. 16. Mains plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected form the mains socket outlet completely. 17. Battery shall not be exposed to excessive heat such as sunshine, fire or the like. 18.
FCC Statement:
LOCATION OF CONTROLS 1) CD door 2) LCD display 3) Volume up/down button 4) CD door open/close button 5) Preset EQ 6) Alarm button 7) Play mode button 8) 3.5mm stereo headphone jack 9) Stop / Mono button 10) Skip / tuning up /down button 11) Aux 1 in 3.
1 1) 2) 3) Place the main unit vertically down to the sub-woofer top as show on picture . Pull the main unit backward unit the bracket hook up & tightly as show on picture Try to lift up the whole system and check whether the main unit & sub-woofer are being combined tightly.
2 5. 6. Repeat step 1 to 4 to store other stations. Now you can select the presets stations in order by pressing the “Folder/Pre–up ” button (6) The pre-set memories will be cancelled completely if dis-connecting the main power supply. You are recommended to switch the system into standby mode for convenience usage. There are 5 seconds for program state, after 5 sec. This state would resume to normal tuner mode automatically.
3 For CD (1) repeat 1 Play mode Repeat track Repeat all Random Off mode (2) repeat all track (3) random (4) off mode Indicator on LCD display & flashing RAN -------------- For MP3 disc/file (1) repeat 1 (2) repeat all tracks (3) repeat 1 folder (5) off mode Play mode Repeat single track Repeat all tracks Repeat single folder Random mode Off mode (4) random Indicator on LCD display & flashing RAN Repeat play You can listen the desired track or whole disc repeat by this function.
4 Aux 2 in connection 1. Press the Function button (16) to select Aux 2 mode. 2. Connect another audio device, e.g. DVD player, VCR player, etc. to this system via a cord with RCA plug. 3. Connect one end of this cord to line out jack on the external device and the other end to the aux-in jack (21) on the back of the unit. 4. Start to playback your home audio device and adjust the volume level properly to enjoy the music by the system.
5 REMOTE CONTROL TRANSMITTER CONTROL FUNCTIONS BATTERY INSTALLATION THE INFRA-RED TRANSMITTER REQUIRE 2 PCS “ AAA “ BATTERY FOR OPERATION BUTTON DESCRIPTION button description On/standby Press to power on / standby the system Mem / Clk-adj In standby mode : press & hold to adjust clock In CD/Tuner mode : press to preset memory Function Press to select the functions Skip up Tune+/Stop /down /St-mono Folder/Pre-up +10/-10 / Press to select previous / next tracks at CD/iPod mode Press to step up