User Manual

4. Install the main wheel axles to the composite landing gear and tighten the nylon-insert lock nut. Install
one wheel collar onto the axle. Use a second wheel collar as a guide to leave a gap on the inboard of the
axle. Use a small drop of thread-lock and tighten in place. Slide the wheel onto the axle and install a
second wheel collar also using thread-lock on the set screw.
5. Fit the wheel pant in place and install using the two supplied bolts. Use thread-lock to secure the bolts in
place. Repeat the above steps for the other main gear.
ENGINE, EXHAUST, & FUEL SYSTEM
1.Templates are provided in the kit for both DA and 3W 50 cc engines as well as the DA 60 engine. Select
the proper guide for your engine and mark and drill the mounting holes and cut out the center as indicated.
Notice that the engine center line is offset to the left to compensate for the right thrust built into the engine
box.