User's Manual

FSM Cable Installation & MEU Activation
Page 19 of 43 Rev. 1A, Rev. Date: 8/31/2006
Use or Disclosure of this document is covered under the Non-Disclosure Agreement executed between the
prospective vendor and Goliath Solutions LLC.
6. Once you have chosen your preferred length, cut the plastic hanger to size and close the
loop by matching up the pre-punched holes at the end of each side and zip-tying them
together.
7. Repeat steps 4 thru 6 with another length of plastic hanger.
8. You will now have two loops of equal length which you can rest your MEU in.
9. Make sure the MEU is turned off and carefully disconnect the end cables on either side
of the MEU. You will also need to remove the phone and power cords as well.
10. Slide one strap over the left end and the other over the right end of the MEU. Position
them between the last two antenna ports on either side of the MEU.
11. Carefully re-attach the antenna cables to their correct ports while keeping the strap
situated between them. Make sure you reconnect the phone and power.
Plastic Hanger affixed
to Ceiling Girders.