User's Manual

FSM Cable Installation & MEU Activation
Page 40 of 43 Rev. 1A, Rev. Date: 8/31/2006
Use or Disclosure of this document is covered under the Non-Disclosure Agreement executed between the
prospective vendor and Goliath Solutions LLC.
number of each receiver they wish to associate with that TX followed by the
ENTER key each time.
d) The FSM may verify the overall stored antenna configuration by pressing SHIFT +
‘K’.
e) In all stores, the FSM must manually configure the MEU to accept the 4
th
TX and
15
th
& 16
th
Rx’s in the stockroom (Pic_5).
f) If a store layout calls for a 14
th
Rx, then that must be manually configured for TX’s
1-3 via the procedure outlined above.