User's Manual

Walgreens Installation Guide
G-1-2002-2B
Walgreens Installation Guide 2B.doc
Use or disclosure of this document is covered under the Non-Disclosure Agreement executed between the reader and Goliath Solutions,
LLC. This document and the information contained herein are privileged and should only be viewed by expressly authorized parties.
5/27/2008 Page: iv
Store Data Form:............................................................................................................B-13
Installation Exception Form:.........................................................................................................B-14
Store Cable Length Form:............................................................................................................B-15
Pre-Installation Survey Checklist: ...................................................................................B-16
Ramset Warning Sign:....................................................................................................B-21
Revision Record
Document
Title:
Walgreens Installation Guide
Revision Page(s)
Number
Remarks
2.0 -4/28/08 All
 Revised for the CMU and MEU III.
2A – 5/13/08
5/15/2008
1-3
2-7, 2-8
2-8, 2-9
2-42
2-57, 2-59
2-17, 2-44,
2-49
B-2
B-13
B-14
B-16
All
2-7 to 2-9
2-44
B-2
B-13
 Walgreens Environment page added
 Example of a 48 port switch added
 Example of two 24 port switched added
 Goliath grid label to mark location of MEU power in
ceiling.
 Goliath grid label to mark location of MEU.
 ATA/ARA added
 Updated contents and quantities of the Hot spare kit.
 Updated Store Data Form to reflect QB entries.
 Added Installation Exception for to lists quantities for
OBF, Shortages/Overages, Hot Spare Usage
 Add do not enter pharmacy to Pre-installation Survey
checklist.
 Replace all references of Tx and Rx in the document
with Tx/ATA and Rx/ARA.
 Stock images and explanation of 24 and 48 port
switches.
 Instructions added for revision D, J and 3 of Tx/ATA
 List 1 box for drywall screws and 1 box for 1” mounting
bases for the Hot Spare Kit.
 Add comment on Store Data Form item 13 and record
revision level for each Tx//ATA and location.