User's Manual

Walgreens Installation Guide
G-1-2002-2B
Walgreens Installation Guide 2B.doc
Use or disclosure of this document is covered under the Non-Disclosure Agreement executed between the reader and Goliath Solutions,
LLC. This document and the information contained herein are privileged and should only be viewed by expressly authorized parties.
5/27/2008 Page: 2-60
The MEU should be mounted to the side of the post or suspended from the roof girders.
 Count all Rx/ARA and Tx/ATA antennas to be installed. Upon completion of the
cable installation the cables should be connected to the MEU according to the
following table.
 Ensure that the MEU is powered off. Never connect the coaxial cables to the
MEU when it is powered on.
Description MEU Port Label
Receiver Rx-1 1
Receiver Rx-2 2
Receiver Rx-3 3
Receiver Rx-4 4
Receiver Rx-5 5
Receiver Rx-6 6
Receiver Rx-7 7
Receiver Rx-8 8
Receiver Rx-9 9
Receiver Rx-10 10
Receiver Rx-11 11
Receiver Rx-12 12
Receiver Rx-13 13
Receiver Rx-14 14
Receiver Rx-15 15
Receiver Rx-16 16
Transmit Tx-1 21
Transmit Tx-2 22
Transmit Tx-3 23
Transmit Tx-4 24
3) Connect the power cable to the MEU and then turn on the power switch on the MEU.
MEU III versions do not have a power switch and should automatically power up once
the power cord is connect.