User's Manual

Walgreens Installation Guide
G-1-2002-2B
Walgreens Installation Guide 2B.doc
Use or disclosure of this document is covered under the Non-Disclosure Agreement executed between the reader and Goliath Solutions,
LLC. This document and the information contained herein are privileged and should only be viewed by expressly authorized parties.
5/27/2008 Page: 2-34
7) Power on the CMU and MEU and observe the lights on the CMU and MEU. Initially
the ASC light will be on solid amber for about 15 seconds and then it will flash about
every 30 seconds. When ASC light is flashing it indicates the CMU and MEU are
communicating correctly.
8) The ON light on the CMU should be a solid green. If it is flickering check the power
brick and verify the light on the brick is solid green. If the light on the power brick is
flickering the power brick is bad and it must be replaced.
If the CMU is located in the
Pharmacy, then disconnect the MEU and proceed to Step 12.
9) If the power brick is good then Velcro the power brick on the side, inside the
communications cabinet. The following picture shows how the brick is installed in a
Catalina cabinet.
Gender changer cable
ASC