User's Manual

Walgreens Installation Guide
G-1-2002-2B
Walgreens Installation Guide 2B.doc
Use or disclosure of this document is covered under the Non-Disclosure Agreement executed between the reader and Goliath Solutions,
LLC. This document and the information contained herein are privileged and should only be viewed by expressly authorized parties.
5/27/2008 Page: 2-47
5) When pulling the CMU/MEU Power Cable to the CMU location the following
requirements must be met.
The CMU/MEU Power Cable must use the same entry method into the Catalina
cabinet as the network cables.
If a pull string is in the ceiling above photo going into the Catalina Cabinet,
the CIT can use this string to pull the cables into the cabinet. But the CIT is
required leave a replacement pull string in place for the next technicians who
may work on the Catalina cabinet to use.
The CMU/MEU Power Cable will exit the Catalina Cabinet through the same knock
out as the CMU/MEU low voltage power cable and the network patch cable to
connect to the output power port on the CMU.
Do not connect the power cable to the MEU until all of the coaxial cables have
been connected to the MEU and each antenna.