Operation Manual

116
DOOR PANEL PROGRAMMING
onfiguration menu.
C
yes
call to exchange
*
yes
yes
autoswitch-on
direct call code
*
*
Allows the activation of a second call code for
each apartment, that can be different to the
programmed call code. This code must be
assigned on the repertory menu (page 121).
Press to disable or enable this feature.
16:24
16:24
O.K.
17:30
set time
modify value
set time
yes
display clock
O.K.
0
371
Coming from previous page
Continue
If the option YES is selected, the calls made
on the door panel will be transferred to the
porter's exchange (if exists) in a first attempt.
To enable this function, the porter's exchange
must enable its capture panel function.
Press to change this value.
Allows to establish video and/or audio
communication without a previous call.
In buildings with several panels, this function
can be activated in one of them only;
in systems with general entrance panel,
this function can be activated in the
internal building door panels only.
Press to change this value.
The system has an internal clock that allows
to show the time on the door panel display
when the system is on stand-by position.
This feature can be disabled on the following
step and on the user menu.
An internal battery keep the system on time
even if the power supply is disconnected
during a long period of time.
To set the time press : the display will show
the message modify value. Key in
the hour value from 0 to 23 and minutes
value from 0 to 59 and confirm by pressing
. If is pressed the former value will be
restored.
Allows to show or to hide the display clock
when the system is on stand-by position.
Press to change this value.
DOOR PANEL PROGRAMMING
117
display mESsAgE
golmar
display mESsAgE
golmar
O.K.
:1315
installer pin
modify value
:1315
O.K.
:9876
installer pin
O.K.
6
789
:1111
user pin
modify value
:1111
O.K.
O.K.
2
345
:5432
user pin
onfiguration menu.
C
Coming from previous page
Continue
The door panel display shows this message
when the system is on stand-by position.
Use this text to show i.e. the building name
or address.
To change this message press and proceed
as described on page 124.
Once the modification has been done the
display will show the message
settings recorded, and will return
to the initial screen.
Allows to change the installer PIN code to enter
into the installer programming menu
(page 106).
Do not let know this code to untrained
people; any change on the programming
menu could produce a system failure.
To change the PIN code press : the display
will show the message modify value.
Key in the new code and confirm by pressing
. If is pressed the former value will
be restored.
Always use a four digits code.
Allows to change the user PIN code to enter
into the user programming menu (page 114).
Any change on this menu will not affect
the system operation.
To change the PIN code press : the display
will show the message modify value.
Key in the new code and confirm by pressing
. If is pressed the former value will
be restored.
Always use a four digits code.