Manual

FS175
- 23-
5007287-01
BA-DE-GB-FR-NL
®
Information: Unconditional observe
the owner’s manual of the engine
manufacturer, which is added!
1. Machine description
1.1 Intended use-description
The FS 175 is a floor saw with a cutting depth of up to
165 mm.
Its operating range includes the concrete and asphalt
road construction, but mainly for transverse,
longitudinal and expansion joints.
Operate the machine only using tools in accordance
with the manufacturer’s instruction. Using other tools is
considered contrary to its designated use. The
manufacturer cannot be held liable for any damage
resulting from such use. The risk of such misuse lies
entirely with the user. Der FS 175 is equipped with a
petrol engine Honda GX390 and should be operated
with the fuel specified by the manufacturer.
1.2 Technical data
Max. cutting depth 165 mm - 6.5 in.
Max. blade-Ø 450 mm - 17.7 in.
Flange size Ø 100 mm - 3.9 in.
Blade shaft size 25,4 mm - 1 in.
Engine
Petrol engine
Robin/Subaru or
Honda
Max. cutting speed with
blade
55 m/s
Engine shaft speed 3600 rpm
Blade shaft speed 2300 rpm
Feed manual
Cutting depth control
Manual with hand wheel
Cutting depth gauge
Scale on frame
Water supply
30l Water tank
for dry cutting blades
V-belt tension manual
Dimensions (L x W x H)
approx. 1200x560x1100 mm
- 47.2x22x43.3 in.
Weight (without water
tank and blade)
approx. 127 kg - 279.4 lbs.
Sound power level after
DIN ISO 6393
No load =104 dB(A)
Full load =114 dB(A)
Sound pressure level
after DIN ISO 6393
No load =88 dB(A)
Full load =98 dB(A)
Vibration
ISO 5349 VDMA
03/2006
a = 4,5 m/s²
1.3 Shipment and provided
accessory
• Floor saw FS175 without blade
• Wrench SW 13,17, 30, 32
• Operating instruction and spare parts list floor saw
• Operating instruction engine
For the item number of accessories, please refer to the
current catalogue of GÖLZ
®
If accessories are used which do not correspond to
GÖLZ
®
specifications, no liability is assumed for any
damage resulting hereof.
For details regarding the selection of the right GÖLZ
®
diamond blades, please refer to the current GÖLZ
®
catalogue for diamond tools.
1.4 Main parts
It is not allowed to move the machine
with rotating blade outside of the area in
which cutting works have to be
performed!
1.& 2. Frame
3. Cutting depth indicator
4. Poly-V belt guard
5. Blade guard
6. Engine
7. Water tank 30l
8. Hand Wheel
9. Pointer unit
10. Lifting eye
11. Push bow
Wear dust
protection!
Wear ear muffs! Never touch!
Important
advice!
General danger!
Danger exists
to cut oneself!