NTS 65 W EuP USB MW 2107GS max. 3500 mA 53986 NTS 72 W EuP USB MW 2102GS max. 3600mA 53985 NTS 90 W EuP USB MW 2108GS max.
Bedienungsanleitung Schaltnetzteil NTS 65 / 72 / 90 W USB MW EuP ACHTUNG! Lesen Sie die Bedienungsanleitung vollständig und sorgfältig durch. Sie ist Bestandteil des Produktes und enthält wichtige Hinweise zur korrekten Inbetriebnahme und Benutzung. Bewahren Sie sie auf, damit Sie diese bei Weitergabe des Gerätes an andere Personen übergeben können.
Sicherheitshinweise: ACHTUNG! Die Montage und Demontage des Produktgehäuses sowie die Wartung der Elektronik darf nur durch ausgebildetes Elektro-Fachpersonal erfolgen! Es besteht u. a.
Bedienungsanleitung 5 Bedienelemente: Spannungswähler für die DC-Ausgangsspannung Bild 1 53986 53985 53982 6 Bedienung: 6.1 Netzteilnutzung für Notebooks: Ihr Notebook kann über diese Funktion betrieben und der interne Notebookakku geladen werden. 1. Stellen Sie die benötigte Ausgangsspannung am Netzteil ein. Diese steht entweder auf Ihrem Gerät, in dessen Bedienungsanleitung oder auf dem originalen Netzteil. Der Pfeil zeigt auf die gewählte Ausgangsspannung wie in Bild 1.
4. Verbinden Sie das Netzteil mit dessen AC-Netzkabel. 5. Schließen Sie Ihr Notebook am zuvor ausgewählten und angeschlossenen DC-Adapterstecker an. 6. Stecken Sie das Netzkabel in eine Netzsteckdose. Die Kontroll-LED leuchtet nun konstant unabhängig der gewählten Ausgangsspannung bis das Netzteil wieder vom Netz getrennt wird. Es muss eine Ausgangsspannung eingestellt sein. 7. Schalten Sie nun Ihr Notebook ein. 6.
Bedienungsanleitung 8 Problembehebung: Problem Maßnahme Das Netzteil funktioniert nicht. Achten Sie auf die richtige Ausgangsspannung und Polung des DC-Adaptersteckers. Achten Sie auf schlüssige Kabelverbindungen. Die Ladefunktion arbeitet nicht. Beachten Sie den Ladestatus Ihres Akkus. Achten Sie die richtige Ausgangsspannung und Polung des DC-Adaptersteckers. Achten Sie auf schlüssige Kabelverbindungen. Die USB-Funktion ist gestört. Lesen Sie kapitel 6.
max.
Manual Switching Mode Adaptor NTS 65 / 72 / 90 W USB MW EuP ATTENTION! Please read the user manual completely and carefully. It is part of the product and includes important information for proper installation and use. Keep this guide to have it available, when there are uncertainties, or the product will be passed on.
3 Notes on Safety: ATTENTION! Only skilled electricians may assemble and disassemble the housing of the product. There is a risk of electric shock and short circuit! • Your product is not a toy and is not meant for children, because it contains small parts which can be swallowed and injured when used inappropriately! • Please install and store the product and its accessories in a way persons cannot be injured, or objects not be damaged for example by dropping or stumbling.
Manual 5 Operating Elements: Selecting switch for DC output voltage Fig. 1 53986 53985 53982 6 Operating: 6.1 Using the Power Supply for Notebooks: You can operate and charge a Notebook and its battery by using this function. 1. Select the required output voltage of the power supply, required for your Notebook. Find it on your device, in its manual or on the original power supply. The arrowhead shows the selected output voltage. (Fig. 1) possible adjustments: Please read the Specifications. 2.
4. Connect the power supply with its AC mains cable. 5. Connect your notebook with the DC adaptor plug after selecting and plugging the right one to your NTS power supply. 6. Plug the mains cable into a mains socket. The LED indicator flashes on and lights continuously independent from the selected output voltage until you plug off the power supply from mains. You must select any output voltage. 7. Now switch on your notebook. 6.
Manual 8 Troubleshooting: Problem Help The power supply does not work. Mind adjusting the right output voltage and polarity. Check all cable connections for proper fitting. The charging function of the battery does not work. Check the charging status of the battery. Mind adjusting the right output voltage and polarity. Check all cable connections for proper fitting. The USB charging function does not work. Read chapter 6.2 and mind proper connections of all cables.
cable length AC/DC/USB 1870/1800/2020 mm Connection - single use: Model output voltage max. output current output power in Watts 53986 53985 53982 9.5-18.5V / 19V / 20V 9.5-20V / 24V 15-22V / 24V 3.5A / 3.4A / 3.25A 3.5A / 3.0A 4A / 3.75A 33.25-64.75 / 64.5 / 65 33.3-65 / 72 60-88 / 90 Connection - for use of power supply and USB output simultaneously: Model output voltage max. output current output power in Watts 53986 53985 53982 9.5-18.5V / 19V / 20V 9.5-20V / 24V 15-22V / 24V 3.
Manual 14
Revision Date: 2010-12-06 Version 2 Goobay ® is a registered trademark of Wentronic GmbH in Germany and/or other countries. Wentronic GmbH Pillmannstraße 12 38112 Braunschweig, Germany Designed and Developed in Germany.