Instructions

11
2 Description and Function:
This product is an universal, microprocessor controlled switching mode power supply for
Notebooks, Mini-Notebooks, LC Displays, etc. It comes with 10 adaptor plugs with reverse
polarity protection for lots of models and a separated 5 Volts USB output for charging or
operating MP3-Players, Camcorders, Mobile Phones, etc. The NTS 90 A easy USB 4.7A
is useable worldwide. The device takes all settings automatically by itself, controlled by the
selected DC adaptor plug. The DC adaptor plugs are preset to the appropriate output
voltage. Only select the right adaptor plug for your device.
Security Features: - antistatic surface and re-resistant housing
- Protection against excess temperature at 85°C,
short-circuit safe
- Over voltage protection at 24 V, over current protection at
>15 A and control of the charging time
3 Intended Use:
This product is made for charging and operating devices like described in chapter 1. We do
not permit using the product in other ways. Use the product only in dry interior rooms.
Not attending to these regulations and safety instructions might cause fatal accidents,
injuries and damages to persons and property.
• Install and store the product and its accessories in a way persons cannot be
injured, or objects not be damaged for example by dropping or stumbling.
• Please remove or store the packing materials well, because children may cut themsel-
ves on them while playing. Furthermore, there is a risk of swallowing and inhalating of
incidentals and insulating material.
• Also read the manual of your device, which is to be charged or operated, like Notebook,
Mobile Phone, etc. for checking the compatibility and tting of the connectors to the
power supply, and the other way round.
• A defective device may not be put into operation, but must be disconnected from mains
and protected against further use. Repairing, such as assembling and disassembling
the housing is only allowed to skilled professionals. By repairing it yourself you will
loose all warranties and there is a risk of electric shock and short circuit.
• Drive the product only with a voltage of 12-24 V DC.
• Unplug the mains cable when not in use and during thunder storms.
• Avoid places with high humidity, or places which might come into contact with water.
• Do not place things on the device.
• Mind and follow the terms of law and health care for using the device in industry.
• Never expose the product to high mechanical pressure.
• Do not modify or change the product or its accessories! Also mind chapter “warranty
and liability“.
• Do not use any damaged parts.
• The device may only be installed and used in dry interior rooms.
• The device may growing warm during use.