Schaltnetzteil NTS 150 W multi USB EuP 8.
Betriebsanleitung Schaltnetzteil NTS 150 W multi USB EuP 8.5A ACHTUNG! Lesen Sie die Betriebsanleitung vollständig und sorgfältig. Sie ist Bestandteil des Produktes und enthält wichtige Hinweise zur korrekten Inbetriebnahme und Benutzung. Bewahren Sie sie auf, damit Sie diese bei Weitergabe des Gerätes an andere Personen übergeben können.
Sicherheitshinweise ACHTUNG! Die Montage und Demontage des Produktgehäuses sowie die Wartung der Elektronik darf nur durch ausgebildetes Elektro-Fachpersonal erfolgen! Es besteht u. a.
Betriebsanleitung 5 Grafische Darstellung Abb. 1 AC Netzanschluss Netzteilgehäuse Wahlschalter für die Ausgangsspannung DC Anschluss DCAdapterstecker 6 Bedienung 6.1 Netzteilnutzung für Notebooks Ihr Notebook kann über diese Funktion betrieben und der interne Notebookakku geladen werden. 1. Stellen Sie die benötigte Ausgangsspannung am Netzteil ein. Diese steht entweder auf Ihrem Gerät, in dessen Betriebsanleitung oder auf dem originalen Netzteil.
Eine falsche Polung kann Ihr Gerät massiv beschädigen oder eine Funktion fehlt völlig. HINWEIS: 3. Stellen Sie sicher, dass die Gesamtbelastung, also die Leistung Ihres Verbrauchers die maximale Ausgangsleistung des Netzteils nicht übersteigt. Diese beträgt 146,5 Watt inklusive USB-Anschluss. 4. Verbinden Sie das Netzteil mit dessen AC-Netzkabel. 5. Schließen Sie Ihr Notebook am zuvor ausgewählten und angeschlossenen DC-Adap- terstecker an. 6. Stecken Sie das Netzkabel in eine Netzsteckdose.
Betriebsanleitung • • • • stromführenden Leitungen Ihres Gerätes! Vermeiden Sie Stellen mit hohen Temperaturen, Feuchtigkeit, bzw. Stellen, die nass werden können, auch bei Pflege, Wartung, Lagerung und Transport. Beachten Sie die Sicherheitshinweise bzgl. Pflege, Wartung, Lagerung und Transport. Das Produkt muss außerhalb des Einflussbereiches von Kindern aufbewahrt werden. Heben Sie die Originalverpackung als Staub- und Feuchtigkeitsschutz und für den Transport auf.
10 Technische Daten Betriebsspannung 100-240 V AC / 50-60 Hz Ausgangsspannung Netzteil USB 12,0-24,0 V DC 5,0 V DC unterstützte Ausgangsspannungen 12/14/15/16/18/18,5/19/19,5/20/22/24 V DC Farbe schwarz Netzstecker Schutzkontakt max. Ausgangsstrom 9,0 A (8,5+0,5 A) max. Ausgangsleistung 144+2,5 W Maße 188 x 64 x 42 mm Gewicht 700 g (ohne Netzkabel und Stecker) Kabellängen AC/DC 1200/1500 mm Stecker unterstützte Modelle Größe (mm) D 6.30 x 3.00 x 14.00 Toshiba E 6.50 x 1.40 x 12.
User‘s Manual Switching Mode Adaptor NTS 150 W multi USB EuP 8.5A ATTENTION! Please read the user User‘s Manual completely and carefully. It is part of the product and includes important information for proper installation and use. Keep this guide to have it available, when there are uncertainties, or the product will be passed on.
3 Notes on Safety ATTENTION! Only skilled electricians may assemble and disassemble the housing of the product. There is a risk of electric shock and short circuit! • • • • • • • • • • • • • • • • • Your product is not a toy and is not meant for children, because it contains small parts which can be swallowed and injured when used inappropriately! Install and store the product and its accessories in a way persons cannot be injured, or objects not be damaged for example by dropping or stumbling.
User‘s Manual 5 Graphic Diagram Fig. 1 AC mains connection Housing Selection key for output voltage DC connection DC plugs 6 Operating 6.1 Using the Power Supply for Notebooks You can operate and charge a Notebook and its battery by using this function. 1. Select the required output voltage of the power supply, needed by your Notebook. You find it on your device, in its User‘s Manual or on the original power supply. The arrowhead shows the selected output voltage. (Fig.
A wrong polarity can damage your device or there is no function at all. NOTE: 3. Make sure of not overloading the Netzteil by a too high power consumption of your device. The maximum output power is 146,5 Watts including USB connection. 4. Connect the power supply with its AC mains cable. 5. Connect your notebook with the DC adaptor plug after selecting and plugging the right one to the power supply. 6. Plug the mains cable into a mains socket.
User‘s Manual • • Reposit the original packaging as protection from dust and humidity for transporting. Follow the safety symbols on the packing during transport. 8 Troubleshooting Problem Help The adjustment of the power supply does not work. Mind assembling in right order in chapter 6.1. Check all cable connections for proper fitting. The charging function of the battery does not work. Mind assembling in right order.
max. output power 144+2.5 W dimensions 188 x 64 x 42 mm weight 700 g (without power cord & plugs) cable length AC/DC 1200/1500 mm Plug Supported Models Dimension (mm) D 6.30 x 3.00 x 14.00 Toshiba E 6.50 x 1.40 x 12.00 Fujitsu, Panasonic, Sony, Samsung G 5.00 x 1.00 x 11.50 Samsung P 5.50 x 2.50 x 12.00 Fujitsu, Acer, Asus, Compaq, Gateway, HP, IBM, Panasonic, Samsung, Sharp, Toshiba, Hitachi T 4.75 x 1.70 x 10.0 HP Pavilion series X 5.50 x 1.70 x 12.00 Acer N 7.90 x 0.
Revision Date: 2013-06-27 Version 1 Goobay® Pillmannstraße 12 38112 Braunschweig Germany Made in China. Hotline: +49 (0180) 5005882 E-Mail: info@goobay.de Web: www.goobay.de *(0,14 € pro Minute aus dem deutschen Festnetz. Maximal 0,42 € pro Minute aus dem Mobilfunknetz.