User manual

16
• The surface must be stable.
Delivered mounting material is only for use with concrete or stone ceilings.
For other surfaces, use other dowels.
 • Theproductmustbeattachedabsolutelystraight.
 • Plants,streetlighting,reectivesurfacesorrandomlymoving
objects must not be located in the detection range.
• The recommended mounting height is 2.2-4 m.
2. Drill 2 mounting holes in the ceiling by using suitable tools.
3. Putttingdowelsintothemoutingholes.
4. Tighten the motion sensor by a screwdriver.
Fig. 9: Mounting
5. Settheadjustmentslikeshowninchapter7.
6. Assemblethecovercap.
7 Settings
Fig . 10: Settings