User manual

15
User manual
5 Installation
Risk of electric shock
• LetopencableendsONLYassemblebyexperienced
electrician.
• Cutoffpowersupplybeforeanyworkontheproduct,
switch off safety fuse and secure against reconnection.
• Assure and check the absence of voltage before any
  workontheproduct.
Thepowercordusedshouldhaveaminimumcrosssectionof1.0mm².The
followingconnectionsaremadetotheterminalblockoftheproduct.
1. Removethecovercap.
2. Connectyourlamps(LOAD)likeshown.
If using several lamps, they must be wired in parallel.
Power cables are installable sidewise or from above.
Fi g . 7: Installation
3. Fix all wire connections using a screwdriver.
4. Insulate the connection against contact and moisture.
The earth wire will not be connected.
6 Mounting
Risk of falling / Material damage
• Place and use tools safely.
• Pay attention to current-carrying or other
lines,lyingbehindplasteranddonotdamagethem!
1. Selectthemountingplaceaccordingtothefollowingcriteria: