User manual

Fig. 8 :Mountingplace

• The surface must be stable.

Delivered mounting material is only for use with concrete or stone ceilings.

For other surfaces, use other dowels.

 • Theproductmustbeattachedabsolutelystraight.

 • Plants,streetlighting,reectivesurfacesorrandomlymoving

objects must not be located in the detection range.

• The recommended mounting height is 2-6 m.

2. Drill 2 mounting holes in the ceiling by using suitable tools.

3. Putttingdowelsintothemoutingholes.

4. Tighten the motion sensor by a screwdriver.

Fig. 9: Mounting

5. Settheadjustmentslikeshowninchapter7.

6. Assemblethecovercap.