User manual
17
User manual
7 Settings
Fig . 10: Settings
7.1 Changing settings
1. Adjust the switch-off delay TIME by using a screwdriver between 10
seconds and 12 minutes.
2. AdjustthepreferredbrightnesssensivityLUXbyusingascrewdriver.
The lighting intensity in LUX is the response limit, the motion detector triggers
below. If this trigger only should work at night, it must be set to 3 LUX. If the
motion sensor should trigger at night and day, set it to the sun symbol .
The trigger sensitivity settings for twilight, etc. are indeed after installation
and must be tested depending on demand.
3. Set the reach SENS a between 2-6 m.
7.2 Reach
120° 360°
2-6m
Ta b . 4 : Reach