User manual

5.2 Installation with separate light switch

Fig. 8 : Installation with separate light switch

ON→OFF: Thelightturnsoffimmediatelyandcannotbeswitchedonfor

1 minute, even if motion is detected. After this period, the sensor goes into

automatic mode.

OFF→ON: Thelightturnson100%brightnessandthenrevertstoauto-

matic mode.

6 Mounting

Risk of falling / Material damage

• Place and use tools safely.

• Pay attention to current-carrying or other

lines, lying behind plaster and do not damage them!

1. Select the mounting place according to the following criteria:

Fig. 9: Mounting place

• The surface must be stable.

• The product must be attached absolutely straight.

 • Plants,streetlighting,reectivesurfacesorrandomlymoving

objects must not be located in the detection range.

• The recommended mounting height is 1,5-3,5 m.