Instructions / Assembly

Please contact (800)527-0998 for further assistance.

Installation

Adjusting the cable length

Installing the circular strap

□ Press the wire restraint

(

B) on the canopy (A) to adjust the

cable(C) as intended if necessary.

□ Find the predrilled holes in the circular strap (DD) that have

indentations on each side. Thread the two mounting

screws (FF) from the indented side into the circular strap

(DD) then out from the raised side of the circular strap (DD).

Thread hex nuts (GG) onto the mounting screws (FF) until

tightly. Note: Please note recommended cable length on a

typical 8 foot ceiling should be 26.5" for each cable.

□

ttach the circular strap (DD) to the outlet box (not included)

using the two provided outlet box screws (EE). The side of

circular strap marked “GND” should face out.

Outlet box