Instructions / Assembly

Page 4
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
2 screw (#8)
ASSEMBLY INSTRUCTIONS:
1. Shut off power at the fuse box or circuit breaker box, if necessary
remove old fixture and all mounting hardware from outlet box.
2. Carefully unpack your new fixture and lay out all the parts on a clear area,
Take care not to lose any small parts necessary for installation.
3. One AC 6W LED Module is assembled. If do LED replacement, unscrew
the screws (#8) and pull out Heat Sink (#9) with LED Module (#10) out
of Back Plate (#1). Then unscrew Screws (#11) to do LED Module
replacement. Finally feed the Heat Sink (#9) with new LED Module
(#10) back to the Back Plate (#1) and secure with Screws (#8).