Instructions / Assembly

Page 4
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
1 Glass Shade (#2) for ITEM 23801 4 Screw (#4) for ITEM 23801
3 Glass Shade (#2) for ITEM 23803 6 Screw (#4) for ITEM 23803
4 Glass Shade (#2) for ITEM 23804 6 Screw (#4) for ITEM 23804
2 Screw (#5) for SKU ITEM 23801
6 Screw (#5) for SKU ITEM 23803
8 Screw (#5) for SKU ITEM 23804
ASSEMBLY INSTRUCTIONS:
1. Shut off power at the fuse box or circuit breaker box. If necessary, remove old fixture
and all mounting hardware from wall outlet box.
2. Carefully unpack your new fixture and lay out all the parts on a clear area. Take care
not to lose any small parts necessary for installation.
3. Fixture glass is pre-assembled. To replace glass, loosen screws (#4) and separate
LED Cover (#3) from Bar (#6). Loosen Screws (#5) and separate Glass Holder (#1)
from the LED Cover (#3).
4. Secure Glass Shade (#2) assembly by adjusting each Screw (#5) into predrilled hole
of the Glass Holder (#1). Secure the LED Cover (#3) onto the Bar (#6) with Screws
(#4).