Instructions / Assembly

Page 6
PARTS INCLUDED FOR INSTALLATION (parts are not to scale):
2 Knurled Knob (#8) 2 Mounting Screws (#10) 2 Outlet Box Screws (#9)
1 Circular Strap (#12) 3 Wire Connectors (#14) 1 Ground Screw (#13)
INSTALLATION INSTRUCTIONS:
1. Screw the two Mounting Screws (#10) into the circular strap (#12). Mount the
circular strap (#12) to the Outlet Box (#11) using the two provided Outlet Box
Screws (#9). [Make sure the threads of the Mounting Screws (#10) are facing outside
when the circular strap (#12) is attached to the Outlet Box (#11).]
2. Connect the white wire from the fixture to the white wire from the Outlet Box (#11),
and the black wire from the fixture to the black wire from the Outlet Box (#11).
Cover the two wire connections using the two provided Wire Connectors (#14).
Wrap the two wire connections with electrical tape for a more secure connection. If
your outlet box has a ground wire (green or bare copper), connect fixture’s ground
wire to it using the wire connector (#14). Otherwise connect the copper ground from
the fixture to Ground screw (#13) on the Circular Strap (#12). Note: If you have
electrical questions, consult your local electrical code for approved grounding
methods.
3. Mount the body of the fixture on the wall by aligning the protruding Mounting
Screws (#10) all the way through the holes on the Back Plate (#7). Be careful not to
pinch any of the wires between the fixture and the Outlet Box (#11). Tighten the
fixture to the wall by screwing the two Knurled Knob (# 8) onto the two protruding
Mounting Screws (#10).
4. Installation is complete. Turn on the power at the circuit breaker or fuse box. Turn
the light switch on to activate the fixture.