User's Manual

Troubleshooting:

1. Make sure both units are plugged into a standard

electrical outlet.

2. If the LED light inside the Transmitter does not flash

when the Remote Control is operated:

• Make sure you are pointing at the front of the

Transmitter (the remote sensor is on the front).

• Make sure you are within 18 feet of the front of

the Transmitter (depending on the range of your

individual remote control, it may be necessary to

move closer to the Transmitter).

• Make sure nothing is blocking the path between the

remote and the Transmitter.

3. If your component does not respond when a remote

control is used, but the LED on the Receiver flashes:

• Make sure the Receiver is within 18 feet of your

component equipment

• Make sure the blaster window on the front of your

Receiver is pointing at the front of your component.

• Make sure there is a clear path between the Receiver

and your component.

4. If the LED light on the Transmitter flashes when you

operate the remote, but the LED on the Receiver does

not:

• Extend the antenna all the way up or move the

antenna to a different position for better reception.

• Make sure the Transmitter is no more than 100 feet

from the Receiver.

LFIRX2