Instruction Manual

Page 8
The Game Caller comes with universal settings and functions that apply to all calls
when set. Below is a list of settings and their functions for your reference.
Repeat – When Repeat is enabled the Calls/Qsets will repeat using the dened
Repeat Delay. Repeat is noted at the top of the screen when REPEAT Mode is active.
Repeat Delay – Repeat Delay is the time between Calls/Qsets playback. This setting
can be set to None, 1 second, 3 seconds, 5 seconds, and 10 seconds.
Backlight Mode – Backlight mode can be set to OFF, ON, or AUTO (Default). When
set to ON, backlight will stay on as long as the remote is powered on. Auto Mode
enables the backlight upon any button PRESS and stays on for 5 seconds after last
PRESS then turning OFF.
Battery Type – Select your battery type for most accurate battery type readings. This
information can be found on the box your battery came in.
About - Displays various rmware information about your game caller and remote
Factory Reset – The Game Caller and Remote can be Factory reset to default
settings and memory cleared by navigating to the ABOUT page in the settings and
PRESS and HOLD the ENTER button.
Settings