User Manual
Table Of Contents
- Table of Contents
- Safety Instructions
- Copyright
- Trademarks
- Introduction
- Features
- Package contents
- System requirement
- Product overview
- Connection
- DIN mounting kit installation
- Pin assignment
- Using SEC (Serial-to-Ethernet Connector)
- Quick starting guide
- Serial to Ethernet Toolkit
- Web console
- Telnet console
- Regulatory compliance
- Specification
33
Port Alias
Port alias is specially designed to allow easy identication
of the aerial devices which are connected to serial server’s
aerial port. The factory default is None and is optional.
Baud rate
Can be set from 110 bps to 921600 bps. The factory default
is 115200 bps.
Data bits
Data bits are 5,6,7,8. The factory default is 8.
Stop bits
Stop bits are 1 ,2. The factory default is 1.
Parity
None, Even, Odd, Space, Mark. The factory default is
None.
Flow control
Supports None, RTS/CTS, DTR/DSR, Xon/ Xoff. The factory
default is None.
Interface: RS-232, RS-485/422 (4-wire), RS-485(2-wire)