User Manual
Table Of Contents
- Table of Contents
- Safety Instructions
- Copyright
- Trademarks
- Introduction
- Features
- Package contents
- System requirement
- Product overview
- Connection
- DIN mounting kit installation
- Pin assignment
- Using SEC (Serial-to-Ethernet Connector)
- Quick starting guide
- Serial to Ethernet Toolkit
- Web console
- Telnet console
- Regulatory compliance
- Specification
69
3. Type <v> to view the settings made on Accessible IP
Settings page.
4. Refer the following table for more details about the
conguration example.
Allowable Hosts Input format
Any host Disable
192.168.2.246 192.168.2.246 /
255.255.255.255
192.168.2.1 to 192.168.2.254 192.168.2.0 / 255.255.255.0
192.168.0.1 to
192.168.255.254
192.168.0.0 / 255.255.0.0
192.168.2.1 to 192.168.2.128 192.168.2.0 /
255.255.255.128
192.168.2.129 to
192.168.2.254
192.168.2.128 /
255.255.255.128
5. Type <m> to go back to the previous menu. If any rule
in Accessible IP Settings page was congured, telnet
console will ask to save settings. Type <1> to save
changes or <0> quit without saving.