User Manual
Table Of Contents
- Table of Contents
- Safety Instructions
- Copyright
- Trademarks
- Introduction
- Features
- Package contents
- System requirement
- Product overview
- Connection
- DIN mounting kit installation
- Pin assignment
- Using SEC (Serial-to-Ethernet Connector)
- Quick starting guide
- Serial to Ethernet Toolkit
- Web console
- Telnet console
- Regulatory compliance
- Specification
76
9. Change password
<< Main Menu >>
Type <9> on the Main Menu, and then press <Enter> to
access Password Settings page.
<< Main Menu -- > Password Settings>>
1. Type <1> to Enable password to the serial server. Type
<1> to Enable or type <0> to Disable the Password
Status.
2. Type <2> to Change the Password of the serial server.
Enter the Old Password. Then give the New Password
and then Re-enter New Password.
10. Load factory defaults
<< Main Menu >>
Type <a> on the Main Menu, and then press <Enter> to
access the Load factory Defaults settings page.