User Manual

Wireless Audio / Mic Adapter User’s Manual
How to Use Your Wireless Audio / Mic Adapter
Caution: DO NOT powered on the wireless audio box alone with battery insert and power
adapter connected at the same time to avoid uncessery dangerous.
No external driver installed under OS support of Win 2000, XP, Vista, Win 7and Mac.
Please follow the steps as below and complete the association process between Wireless
Audio Dongle and Wireless Audio Box.
1. Plug the Wireless Audio Dongle into the USB port of PC or Mac, and you may find the
LED start blinking for powered on indicator.
2. Powered on the Wireless Audio Box with battery insert or power adapter connected
first, and then press the Wireless Audio Box PWR button over 3 seconds until the
Wireless Audio Box LED start blinking for powered on indicator.
3. Please plug headphone or speaker into audio output before pairing. Press the Wireless
Audio Dongle pairing bottom over 3 seconds first and then press the Wireless Audio
Box Volume bottom over 3 seconds until you heard the beep sound form headphone
or speaker to indictor the association successfully.
4. Now the association has been successfully, and you may start to use your Wireless
Audio/ Mic Adapter.
Note：
The Wireless Audio Box will be automatically entry the power saving mode when no audio
single receive after five minutes about, please re-push the PWR button for power on and
keep use the Wireless Audio / Mic Adapter.
4