User's Manual

3. Establishing the Connection
Wireless Phone Display Link Status
The RF link is established but SkyWin is not active.
Action: Launch SkyWin.
The RF link is established but Skype is not active or SkyWin is
not allowed to access Skype.
Action: Launch Skype. Also, allow SkyWin to access Skype
(refer to “Managing SkyWin Access to Skype” on page 9).
Standby mode.
To resume for standby mode, just press the OK key on the
phone.
N/A
The wireless phone is switched off or running off the power.
Action: Power on your wireless phone or charge the wireless
phone.
Notes on Establishing Wireless Link
 Your wireless phone and dongle are packaged as an exclusive pair. They
share a unique ID to communicate only to each other. This means your
wireless phone cannot link to a dongle other than the one delivered with the
wireless phone and vice versa. Likewise, you cannot expect the wireless
phone to work with multiple dongles and vice versa.
 Currently up to 7 pairs of wireless phone and dongle can co-exist within one
radio range. The more pairs are present, the more likely interference will occur
and thereby reduce the transmission range.
 The maximum outdoor wireless range is about 30 meters while indoor range is
about 15 meters in an open-air environment. If you cannot make the link, move
the wireless phone closer to the dongle.
 Other Bluetooth adapters may detect the presence of your wireless phone and
USB dongle (which are identified as WBPA-G-Remote and WBPA-G-Dongle).
But they cannot build a connection with either of them.
13