User's Manual

05
SETUP
CHARGING YOUR HEADSET
The headset contains a rechargeable Li-ion polymer battery. Prior to using the
headset for the first time, it is strongly recommended to fully charge the battery.
Connect the USB cable to your PS3™ [1] and the mini jack [2] to the headset's
charging socket [3]. The LED will illuminate green during the charging process and will
be off when fully charged. NOTE: Charging indication will be delayed for a few minutes
if the headset has not been used for a long time or if the battery is drained.
CHARGING TIME
Normally the battery is fully recharged within 3 hours. As soon as the battery
is fully charged, the LED will be off or weak Green. Disconnect the USB cable
from the PS3™ and the headset.
GAME TIME
The fully charged battery offers up to 4 hours continuous use. It is advisable
to always recharge after lengthy gameplay so the headset is fully charged for
the next round.
3
2
1
06
OPERATION
PAIRING YOUR HEADSET
1 Power on your PS3 console.
2 Within the Settings' menu, press X on Accessory Settings.
3 Press X on the icon labeled: Register Bluetooth® Device.
4 Scroll down and press X on the icon labeled: Register
Headset/Microphone/Headphones.
5 Once at the next screen, prepare the Headset to be paired with the PS3 by
holding down the power button until the LED flashes Blue and Green (hold button
approx 9 seconds).
6 Once the Headset’s LED indicator is alternately flashing Blue and Green
(indicating the Headset is ready to be paired), press X on Start Scanning.
7 Once Scan is complete, the PS3 will recognize all Bluetooth devices within range.
8 Locate EX-01 from the list of available devices and press X on its icon to be
prompted for a Pass Key
9 Enter 0000 (four zeros) as the Pass Key and press X on OK
10 You should then be taken to a new screen stating: Register completed
USB
Do not try to pair the headset to the PLAYSTATION 3 when
the headset is attached to the USB cable. If it is attached
to the USB cable when trying to pair up, it won't pair with
the PLAYSTATION 3.