AMST Spec Sheet
6 www.goodmanmfg.com SS-GAMST
Airflow Data
See notes on page 7.
Airflow Data (cont.)
AMST
48CU1400AA
T1 1,165 1,390 1,330 1,310 1,235 1,220 1,135 1,125 1,050
T2 1,210 1,550 1,490 1,470 1,400 1,390 1,315 1,305 1,230
T3 1,215 1,610 1,560 1,545 1,480 1,470 1,400 1,390 1,315
T4 1,495 1,710 1,660 1,640 1,560 1,550 1,485 1,475 1,410
T5 1,435 1,795 1,750 1,735 1,680 1,670 1,605 1,595 1,525
T6 1,410 1,435 1,375 1,355 1,280 1,265 1,165 1,155 1,065
T7 1,440 1,700 1,650 1,635 1,570 1,560 1,495 1,485 1,420
T8 1,230 1,730 1,680 1,665 1,595 1,585 1,515 1,505 1,425
T9 1,495 1,295 1,230 1,210 1,130 1,115 1,025 1,015 930
AMST
48DU1400AA
T1 1,425 1,395 1,335 1,320 1,250 1,240 1,165 1,155 1,070
T2 1,510 1,480 1,425 1,410 1,345 1,335 1,270 1,260 1,185
T3 1,605 1,580 1,525 1,510 1,450 1,440 1,375 1,365 1,300
T4 1,875 1,855 1,810 1,795 1,735 1,725 1,670 1,665 1,605
T5 1,755 1,730 1,680 1,665 1,605 1,595 1,535 1,525 1,465
T6 1,350 1,320 1,260 1,245 1,175 1,160 1,085 1,075 980
T7 1,140 1,105 1,040 1,020 935 915 805 790 685
T8 1,605 1,580 1,525 1,510 1,450 1,440 1,375 1,365 1,300
T9 1,605 1,580 1,525 1,510 1,450 1,440 1,375 1,365 1,300
AMST
60DU1400AA
T1 1,215 1,175 1,095 1,070 975 950 790 780 700
T6 1,815 1,785 1,725 1,710 1,650 1,640 1,570 1,560 1,490
T7 1,360 1,325 1,250 1,230 1,145 1,125 1,010 990 850
T8 2,070 2,045 1,995 1,980 1,930 1,920 1,855 1,845 1,785
T9 1,970 1,945 1,895 1,880 1,815 1,805 1,740 1,730 1,600
1. Airow data indicated is at 230V without air lter in place.
2. The chart is for informaon only. For sasfactory operaon, external stac pressure must not exceed value shown on rang plate.
The shaded area indicates ranges in excess of maximum design external stac pressure.
3. Use the CFM adjustment factors of 0.98 for horizontal le and 0.96 for horizontal right & downow orientaons
4. When applying a humidistat (normally closed), refer to the installaon and operang instrucons. The humidistat can adjust the
cooling airow to 85%.
Horizontal Le Factor 0.98
Horizontal Right Factor 0.95
Downow Factor 0.96