Service Manual

ManualsBrandsGOODMAN ManualsForced Air Furnaces96% AFUE 60,000 BTU Multi-Positional 2-Stage Variable Speed Natural Gas Furnace with 17.5 in. Cabinet

PRODUCT IDENTIFICATION

MODEL # MFG # DESCRIPTION

CTK02**

Communicating Thermostat Kit-

Digitally communicating thermostat. Designed for

use with compatible Amana® Brand or Goodman® Brand Air Handlers or Furnaces

and outdoor split AC or Heat Pump units. The CTK02** thermostat features a full color

high definition display, advanced programming options including humidification control

& heat and cool maximum temperature settings, a USB plug allowing dealers the

ability to insert pre-programmed operating parameters and dealer information by use

of an online data entry system.

CTK03AA

Communicating Thermostat Kit-

Digitally communicating touchscreen thermostat

from Honeywell. Designed for use with compatible Amana® Brand or Goodman®

Brand Air Handlers or Furnaces and outdoor split AC or Heat Pump units. The

CTK03AA thermostat features full color high definition display and can be used with

RedLINK wireless accessories.

CTK03AB

Communicating Thermostat Kit-

Digitally communicating touchscreen thermostat

from Honeywell. Designed for use with compatible Amana® Brand or Goodman®

Brand Air Handlers or Furnaces and outdoor split AC or Heat Pump units. The

CTK03AB thermostat features full color high definition display and can be used with

RedLINK wireless accessories and added capabilty to control the HUM IN - HUM OUT

relay.

CTK04

CTK04AA

Communicating Thermostat Kit-

Digitally communicating touchscreen thermostat

from Honeywell. Designed for use with compatible Amana® Brand or Goodman®

Brand Air Handlers or Furnaces and outdoor split AC or Heat Pump units. The CTK04

thermostat features full color high definition display and can be used with RedLINK

wireless accessories and added capabilty to control the HUM IN - HUM OUT relay. Split

system inverter capable.

DCVK-20

(CVENT-2)

DCVK-30

(CVENT-3)

N/A

Concentric Vent Kit.

For use with Amana® Brand 90% furnace models. This kit is

designed to allow terminations of a direct vent furnace to be "concentrically" vented

through a wall or roof. This kit allows a single penetration to support terminations for

both the vent/flue and the combustion air intake pipe. The DCVK-20 (2") and DCVK-30

(3") kits are certified for models listed above. See specification sheets on future

models for use of the vent kit.

0170K00000S

N/A

Side Wall Only Concentric Vent Kit

. For use with 90% furnace models. This kit is to be

used with 2" - 3" vent systems. The vent kit must terminate outside the structure. This

kit is NOT intended for use with single pipe (indirect vent) installations.

0170K00001S

N/A

Side Wall Only Concentric Vent Kit

. For use with 90% furnace models. This kit is to be

used only with 2" vent systems. The vent kit must terminate outside the structure. This

kit is NOT intended for use with single pipe (indirect vent) installations.

DEHUM1

P1227801F

Dehumidistat.

For use with Goodman® and Amana® Brand two-stage variable speed

furnace models. Wall mounted, 24 volt humidity control available as a Dehumidistat

used to reduce the airflow in the air conditioning mode when necessary to lower the

humidity in an occupied home to prevent dew build-up associated with high humidity

levels. This control features a moisture-sensitive nylon element and also provides

positive ON-OFF settings for manual operation. The control is a normally closed switch

that opens on humidity rise causing the blower to switch to a lower speed to control the

humidity within the structure.