GPD14 Spec Sheet

SS-GPD14M www.goodmanmfg.com 1/18
Supersedes 7/17
Cooling Capacity: 23,800 – 45,500 BTU/h
Heating Capacity: 60,000 – 138,000 BTU/h
* Complete warranty details available from your local dealer or at www.goodmanmfg.com. To receive the 10-Year Parts Limited Warranty,
online registraon must be completed within 60 days of installaon. Online registraon is not required in California or Quebec.
Contents
Nomenclature ........................................ 2
Product Specicaons ........................... 3
Expanded Cooling Data ......................... 4
Expanded Heang Data ...................... 14
Airow Data ......................................... 16
Dimensions .......................................... 17
Wiring Diagrams ................................. 18
Accessories .......................................... 20
Standard Features
Combines cooling with heat pump and gas
heang for opmal year-long performance
Durable, corrosion-resistant T-140
aluminized steel tubular heat exchanger
Energy-ecient scroll compressor
Heavy-duty aluminized-steel heat exchanger
Mul-speed ECM indoor blower motor
Copper tube/aluminum n coil
All-aluminum evaporator coil
Two-stage gas valve; natural gas with easy
conversion to propane with accessory kit
Power-assisted combuson
Loss-of-charge protecon
Direct spark ignion system includes
a microprocessor-based control for
the enre ignion sequence
All blower operaon and all safety
circuits complete with self-diagnoscs
All models comply with Califor-
nia Low NOx emission standards
AHRI Cered; ETL Listed
Cabinet Features
Fully insulated heavy-gauge, zinc-coated steel
cabinet with UV-resistant powder-paint nish
Louvered metal panel condenser coil protecon
Aluminum foil-facing internal insulaon
reinforced with berglass scrim
Compressor sound blanket
Convenient access panels
One roof curb ts all units
Boom, 2” high base rails for easy handling
All models t a standard-size pick-up truck
When properly anchored, meets the 2010 Florida
Building Code unit integrity requirements for
hurricane-type winds (Anchor bracket kits available.)
Meets cabinet air leakage requirements when
tested in accordance with ASHRAE standard 193
One footprint for all tonnages
GPD14M
Packaged Dual-Fuel Units
Up to 14.5 SEER
81% AFUE / 8.0 HSPF

Summary of content (20 pages)