GPG14M Installation Manual

Outside Slab Installation

ROOFTOP I NSTALLATIONS ONLY:

NOTE: To ensure proper condensate drainage, unit must be

installed in a level position.

• To avoid possible property damage or personal injury, the

roof must have sufficient structural strength to carry the

weight of the unit(s) and snow or water loads as required

by local codes. Consult a structural engineer to determine

the weight capabilities of the roof.

Rooftop Installation

• The unit may be installed directly on wood floors or on

Class A, Class B, or Class C roof covering material.

• To avoid possible personal injury, a safe, flat surface for

service personnel should be provided.

ROOF CURB I NSTALLATIONS O NLY:

• Sufficient structural support must be determined prior to

locating and mounting the curb and package unit.

• Ductwork must be constructed using industry guidelines.

The duct work must be placed into the roof curb before

mounting the package unit.

• Curb insulation, cant strips, flashing and general roofing

material are furnished by the contractor.

Roof Curb Installation